Vacon NXL 0023 5 - Control Keypad; Receipt of Delivery

12(80) Receipt of delivery vacon
Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 205
24-hour support: +358-40-8371 150 Email: vacon@vacon.com
3
3. RECEIPT OF DELIVERY
Vacon NXL frequency converters have undergone scrupulous tests and quality checks at the factory
before they are delivered to the customer. However, after unpacking the product, check that no
signs of transport damages are to be found on the product and that the delivery is complete
(compare the type designation of the product to the code below, Figure 3-1.
Should the drive have been damaged during the shipping, please contact primarily the cargo
insurance company or the carrier.
If the delivery does not correspond to your order, contact the supplier immediately.
3.1
Type designation code
Figure 3-1. Vacon NXL type designation code
3.2 Storage
If the frequency converter is to be kept in store before use make sure that the ambient conditions are
acceptable:
Storing temperature –40…+70°C
Relative humidity <95%, no condensation
NXL 0004
C 1 N 1 SSS 00
5
Produc
t
ran
g
e: NXL = NX Li
g
h
t
Nominal current (low overload)
Maximum continuous current of the unit at 40 deg
e.g. 0007 = 7 Amps.
Nominal mains voltage:
2 = 208–240Vac, 5 = 380–500Vac
Control keypad:
B = No control keypad
C = standard seven-segment keypad
Enclosure classification:
1= IP20
EMC emission level:
N = No EMC emission protection
H = With an RFI filter (option)
Brake chopper
0 = no brake chopper
1 = internal brake chopper
Hardware modifications; Supply - Mounting - Boards
SSS = Standard
SDS = Din rail mounting
Factory installed I/0 boards and expanders:
00= no board,
AA = expander I/O board,
C3 = profibus board