Vacon NXL 0023 5 - System menu (S6)

vacon Control keypad 59(80)
Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 205
24-hour support: +358-40-8371 150 Email: vacon@vacon.com
7
7.3.6 System menu (S6)
The System menu can be entered from the main menu by pushing the Menu button right when the
location indication S6 is visible on the display.
The controls associated with the general use of the frequency converter, such as keypad settings,
customised parameter sets or information about the hardware and software are located under the
System menu.
Below you will find a list of the functions available in the System menu.
Functions in the System menu
Code Function Min Max Unit Default Cust Selections
S6.3
Copy
parameters
P6.3.1 Parameter sets
0 = Select
1 = Store set 1
2 = Load set 1
3 = Store set 2
4 = Load set 2
5 = Load factory defaults
6 = Fault
7 = Wait
8 = OK
S6.5 Security
P6.5.2 Parameter lock 0
0 = Change Enabled
1 = Change Disabled
S6.6 Keypad settings
P6.6.1 Default page 1.1
P6.6.3 Timeout time 5 65535 s 30
S6.7
Hardware
settings
P6.7.1
Brake resistor
connection
0
Note! External brake
resistor is available only for
sizes MF3 to MF6
P6.7.2 Fan control 0
0 = Continuous
1 = Temperature (only sizes
MF4 and bigger)
P6.7.3
HMI acknowledg.
timeout
200 5000 ms 200
P6.7.4 HMI number of retries 110 5
S6.8 System info
S6.8.1
Counters menu
C6.8.1.1 Mwh counter KWh
C6.8.1.2
Operating days
counter
hh:mm:
ss
C6.8.1.3
Operating hours
counter
hh:mm:
ss
S6.8.2
Trip counters
T6.8.2.1 MWh trip counter kWh
P6.8.2.2
Clear MWh trip
counter
T6.8.2.3
Operating days trip
counter