Vacon NXL 0023 5 - Control connections

vacon Cabling and connections 35(80)
Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 205
24-hour support: +358-40-8371 150 Email: vacon@vacon.com
6
6.2 Control unit
The control unit of the Vacon NXL frequency converter is integrated with the power unit and consists
roughly of the control board and one optional board, which can be connected to the slot connector
of the control board.
The frequency converter is delivered from the factory with the basic configuration without an option
board.
6.2.1 Control connections
The basic control connections are shown in Chapter 6.2.2.1.
The signal descriptions of the Multicontrol Application are presented below and in Chapter 2 of the
Application Manual.
Figure 6-13. Control connections, MF2
Figure 6-14. Control connections, MF3
Figure 6-15. Control connections, MF4, MF5
nxlk13.fh8
21 22 23
910111819A B
12345678
L1 L2 L3
U/T1 V/T2 W/T3
nxlk14.fh8
21 22 23
9 10111819 A B
1 234 567 8
L1 L2 L3
U/T1 V/T2 W/T3 BR+ BR-
nxlk49.fh8
30
9 10111819 A B
21 22 23
12345678