vacon Control keypad 63(80)
Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 205
24-hour support: +358-40-8371 150 Email: vacon@vacon.com
7
Timeout time (P6.6.3)
The Timeout time setting defines the time after which the keypad display returns to the Default Page
(P6.6.1), see above.
Move to the Edit menu by pressing the Menu button right. Set the timeout time you want and confirm
the change with the Enter button. You can return to the previous step anytime by pushing the Menu
button left.
NOTE: This function cannot be disabled.
Figure 7-13. Timeout time setting
7.3.6.4 Hardware settings
In the Hardware settings submenu (S6.7) you can further customise the settings of the frequency
converter with four parameters: Brake resistor connection, Fan control, HMI
acknowledgement timeout and HMI retry.
Brake resistor connection (P6.7.1)
With this function you can tell the frequency converter whether the brake resistor is connected or
not.
0 = Not connected (Default)
1 = Connected
NOTE! An external brake resistor can be connected to sizes MF3 and bigger. When
a brake resistor is not connected, the value of this parameter must not be changed
to 1.
To Next Page
Loading...
