vacon Control keypad 43(80)
Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 205
24-hour support: +358-40-8371 150 Email: vacon@vacon.com
7
7.2 Keypad push-buttons
The Vacon seven-segment control keypad features 7 push-buttons that are used for the control of the
frequency converter (and motor), parameter setting and value monitoring.
Figure 7-2. Keypad push-buttons
7.2.1
Button descriptions
Reset
enter = There are two operations integrated in this button. The button operates
mainly as reset button except in the parameter edit mode. The button
operation is shortly described below.
reset = This button is used to reset active faults.
enter = The Enter button serves for:
1) confirmation of selections
2) fault history reset (2…3 seconds)
= Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
= Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
–
+
To Next Page
Loading...
