Need help?Do you have a question about the Vaillant VR 34 and is the answer not in the manual?
Guidance on storing installation manuals for the system and boiler accessories for future reference.
Explanation of safety symbols (Danger, Caution, Note) and their importance in installation manuals.
Confirms the manual applies exclusively to equipment with part number 0020017897.
Crucial safety advice regarding fatal electric shock; emphasizes power disconnection and securing against reactivation.
Wiring must be done by qualified persons according to Building Regulations, Part P, and BS 7671, with a 6m cable limit.
Specifies the interface connects a DDC controller to a Vaillant eBUS boiler; warns against improper use.
Confirms the interface meets relevant directives and standards when installation regulations are observed.
Details using the interface for BEMS connection to Vaillant boilers, signal conversion, and error signaling.
Lists the items included in the package: 1 VR34 0-10 V interface, 1 connection terminal, and 1 cable clamp.
Diagram and key illustrating the connection points for the boiler and the BEMS controller on the interface.
Step-by-step guide for fitting the 0-10 V interface into the boiler's electronic box, including cable connections.
Instructions for connecting the external BEMS controller to the VR34 interface, emphasizing polarity and earth connection.
Explains the function and indications of the green status LED for BEMS connection, eBUS link, and data transmission.
The interface is not household waste and must be disposed of properly according to regulations.
Ensures that the packaging materials are also taken for proper disposal after use.
Guidance on storing installation manuals for the system and boiler accessories for future reference.
Explanation of safety symbols (Danger, Caution, Note) and their importance in installation manuals.
Confirms the manual applies exclusively to equipment with part number 0020017897.
Crucial safety advice regarding fatal electric shock; emphasizes power disconnection and securing against reactivation.
Wiring must be done by qualified persons according to Building Regulations, Part P, and BS 7671, with a 6m cable limit.
Specifies the interface connects a DDC controller to a Vaillant eBUS boiler; warns against improper use.
Confirms the interface meets relevant directives and standards when installation regulations are observed.
Details using the interface for BEMS connection to Vaillant boilers, signal conversion, and error signaling.
Lists the items included in the package: 1 VR34 0-10 V interface, 1 connection terminal, and 1 cable clamp.
Diagram and key illustrating the connection points for the boiler and the BEMS controller on the interface.
Step-by-step guide for fitting the 0-10 V interface into the boiler's electronic box, including cable connections.
Instructions for connecting the external BEMS controller to the VR34 interface, emphasizing polarity and earth connection.
Explains the function and indications of the green status LED for BEMS connection, eBUS link, and data transmission.
The interface is not household waste and must be disposed of properly according to regulations.
Ensures that the packaging materials are also taken for proper disposal after use.
General| Brand | Vaillant |
|---|---|
| Model | VR 34 |
| Category | Recording Equipment |
| Language | English |
To Next Page
