EasyManua.ls Logo

Vaisala HMT360Series - CSA, Japan, Australia Classifications

Vaisala HMT360Series
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications ______________________________________________________________________
Vaisala _________________________________________________________________________ 55
Canada (CSA) Class 1, Divisions 1 and 2, Groups A,B,C,D
Class II, Divisions 1 and 2, Groups G and Coal
Dust
Class III
CSA File No: 213862 0 000;
CSA report 1300863
T
amb
= 60 ºC, T4
Japan (TIIS) Ex ia IIC T4
Code number: C15354
Safety factors U
i
= 28 VDC, I
i
=100 mA, Ci=1nF, Li=0,
Pi=0.7 W T
amb
= 60 ºC
Australia (TestSafe) Certificate No: Ex AUS Ex 3738X
Marking code: Ex ia IIC T5 IP65
AUS Ex 3738X
Safety factors V
max
= 28 VDC, I
i
=100 mA, P
i
= 0.7 W,
Ci=1nF, Li=0 mH
General
Operating voltage 12...28 V
with serial port (service mode) 15...28 V
Connections screw terminals, 0.33...2.0 mm
2
wires
(AWG 14-22)
Cable bushing Pg11 (5...12mm)
Conduit fitting Pg11/NPT 1/2"-14
Operating temperature range for
electronics -40...+60 °C
with display and/or with
Storage temperature range -40...+70 °C
Housing material G-A1Si 10 Mg (DIN 1725)
Housing classification IP 65 (NEMA 4)
Housing dimensions 164 x 115 x 62 mm
Housing weight 950g
Fully electromagnetically compatible
according to standards EN 61326-1:1997 +Am :1998,
Electrical equipment for
measurement, control and laboratory
use - EMC requirements; Industrial
environment
Note ! IEC 1000-4-5 complies only
when using external EXi approved
surge arrester on safe area.

Table of Contents

Related product manuals