Vaisala K-PATENTS PR-23 Series User Manual

90
PR-23 instrucon manual
-AX = ATEX and IECEx cered Ex II 3G, Ex nA IIC T4 Gc (up to zone 2) (T
amb
-20...+65°C)
-AX
-IA = Ex and IECEx cered Ex II 1G, Ex ia IIC T4 Ga (up to zone 0) (T
amb
-20...+65°C) (A) -IA
-IF = IF cered to US and Canadian standards Class I, Div.1, Groups A, B, C, D T4 (T
amb
-20 ...
+45°C (A)
-IF
Sensor housing
-AA = Anodized Aluminium -AA
-SC = Stainless steel AISI 316 -SC
Prism wash
-SN = Integral steam nozzle, AISI 316 L -SN
-WN = Integral water nozzle, AISI 316 L -WN
-WP = Integral pressurized water nozzle, AISI 316 L
(A) Available with STR Indicang transmier and IS isolator only
9.4.2 PR-23-AP mounng hardware model code
Mounng hardware for PR-23-AP sensor
Part number and descripon Part no.
VFMA-23-PSS = Tank boom ange for PR-23-AP, MT4 DN 25/1T VFMA-23-PSS
VFBP-23-PSS = Tank boom blind ange for PR-23-AP, MT4 DN 25/1T VFBP-23-PSS
VFME-23-VSS = Mount adaptor for PR-23-AP-62-VSS HEXNUT type VFME-23-VSS
VFMF-23-VSS = Mount adaptor for PR-23-AP-62-VSS HEXNUT extended VFMF-23-VSS
Model and descripon Model
AP = Adapter for PR-23-AP AP
Sensor type
-T = Sanitary 3A-clamp, 2½ inch, inseron lenght 170 mm -T
-ZP = Sanitary I-line male (14 WI) 2½ inch, inseron length 178 mm -ZP
Material of construcon
SS = AISI 316 L SS
Process connecon
-P = MT4 DN 25/1T Tank boom ange, ush mounted -P
Inseron length adapter
30 = 30 mm 30
Prism wash
-SN = Integral steam nozzle, AISI 316 L -SN
-WP = Integral pressurized water nozzle, AISI 316 L -WP
-WN = Integral water nozzle, AISI 316 L -WN

Vaisala K-PATENTS PR-23 Series Specifications

General

Brand	Vaisala
Model	K-PATENTS PR-23 Series
Category	Measuring Instruments
Language	English