Vaisala K-PATENTS PR-23 Series - Diagnostic Messages Table

74
PR-23 instrucon manual
8.4 Diagnosc messages table
           
 NO OPTICAL IMAGE  TEMP MEASUREMENT FAULT    NO OPTICAL
IMAGE             
 
      FUNCTION INSTRUMENT OK     
         
            
      
   

    
SHORT-CIRCUIT   
NO SIGNAL   
OUTSIDE LIGHT ERROR 
NO OPTICAL IMAGE  
TEMP MEASUREMENT FAULT   
PRECONDITIONING  
WASH  
RECOVERING  
HIGH SENSOR HUMIDITY 
HIGH SENSOR TEMP 
HIGH TRANSMITTER TEMP 
LOW TRANSMITTER VOLT 
EXTERNAL WASH STOP  
LOW TEMP WASH STOP  
NO SAMPLE/WASH STOP  
EXTERNAL HOLD  
NO SAMPLE   
PRISM COATED   
OUTSIDE LIGHT TO PRISM  
LOW IMAGE QUALITY  
PRISM WASH FAILURE  
PRISM WASH WARNING  
NO SENSOR   
NORMAL OPERATION 