EU DECLARATION OF CONFORMITY
Manufacturer: Vaisala Oyj
Mail address: P.O. Box 26, FI-00421 Helsinki, Finland
Street Address: Vanha Nurmijärventie 21, Vantaa, Finland
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration:
K-Patents Process Refractometer PR-23-…-IA
The object of the declaration described above is in conformity with Directives:
RoHS Directive (2011/65/EU)
EMC Directive (2014/30/EU)
ATEX Directive (2014/34/EU)
Low Voltage Directive (2014/35/EU)
The conformity is declared using the following standards:
EN 50581:2012
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous substances
EN 60079-0:2012 + A11:2013
Explosive atmospheres - Part 0: Equipment -
General requirements
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by
intrinsic safety "i"
EN 61010-1:2010 Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory
use – EMC requirements – intended for use in industrial locations
Notified body Eurofins Expert Services Oy (number 0537) has issued EU-type
examination certificate EESF 19 ATEX 028X for this product.
Signed for and on behalf of Vaisala Oyj, in Vantaa, on 1
st
September 2019
______________________________________
Jukka Lyömiö
Standards and Approvals Manager
To Next Page
Loading...
