Vaisala K-PATENTS PR-23 Series User Manual

9 Sensor specicaons
79
EHEDG
-EH = EHEDG Type EL Class I Cered Model -EH
Polishing opon
-EP = Electropolished process weed parts (RA 0.38µm, 15 µ inch) -EP
Elbow ow cells with prism wash nozzle for PR-23-AC-63-HSS
Model and descripon Model
AFC = Elbow ow cell AFC
Sensor connecon
-H = Sanitary 3A-clamp, 2½ inch -H
Material of construcon
SS = AISI 316 L SS
Process connecon
-H = Sanitary 3A-clamp -H
Pipe secon diameter
10 = 25 mm (1 inch) 10
15 = 40 mm (1½ inch) 15
20 = 50 mm (2 inch) 20
25 = 65 mm (2½ inch) (A) 25
30 = 80 mm (3 inch) (A) 30
40 = 100 mm (4 inch) (A) 40
Flow cell inlet type
-SI = Straight pipe -SI
-RI = Reduced pipe (cone) -RI
Wash nozzle connecon
-NC = Nozzle connecon -NC
Wash nozzles
-SN = Steam nozzle, threads G ¼ inch female -SN
-WN = Water nozzle, threads G ¼ inch female -WN
-WP = Pressurized water nozzle, threads G ¼ inch female -WP
-PG = Plug for nozzle connecon -PG
(A) with -SI opon only

Vaisala K-PATENTS PR-23 Series Specifications

General

Brand	Vaisala
Model	K-PATENTS PR-23 Series
Category	Measuring Instruments
Language	English