Function menu Compa II series
52 Operating manual 07.15
Press key
to arrive the next menu item.
Off: In order to start the measurement procedure you have to change
to the menu Measure label.
Measure: After switching on the printer, the loaded label is
automatically measured.
Feed: After switching on the printer the label is synchronised to the
beginning of label. For this one or multiple labels are advanced.
6.6 Network
Switch on the label printer and the display shows the main menu.
Press key
to access the function menu.
Press key
as long as you arrive the Network menu.
Press key
to select the menu.
For more information, please see the separate manual.
6.7 Remote console
Switch on the label printer and the display shows the main menu.
Press key
to access the function menu.
Press key
as long as you arrive the Remote console menu.
Press key
to select the menu.
For more information please contact our sales department.
Synchronisation at
print start
To Next Page
Loading...
