Need help?Do you have a question about the Valley Rainger Linear and is the answer not in the manual?
General| Category | Farm Equipment |
|---|---|
| Type | Linear Irrigation System |
| Power Source | Electric |
| Certifications | ISO |
| Model | Valley Rainger Linear |
| Length | Variable, custom designed to field dimensions |
| Water Application Rate | Variable, based on nozzle selection and travel speed |
Information on how to understand and follow safety instructions.
Explanation of DANGER, WARNING, CAUTION symbols and messages.
Requirements for appropriate PPE when working with electrical hazards.
Guidelines for handling conductive materials near energized parts.
Procedures and requirements for preventing falls.
Table specifying required clearance around electrical equipment.
Definition of a qualified person for electrical work.
Safety precautions for operating near airports and aircraft.
Warnings and clearance requirements for working near power lines.
Step-by-step procedure for safely isolating energy sources.
General tips and critical warnings for safe machine operation.
Identification and importance of various safety decals on the machine.
Overview of Standard Cart system types.
Overview of the Center Feed system configuration.
Overview of the End Feed system configuration.
Overview of Swing Around cart system types.
Overview of Swing Around cart with Furrow Guidance.
Overview of Swing Around cart with Below Ground Guidance.
Explanation of spans, drive towers, hitch, overhang, and end guns.
Details on sprinklers, side load safety, span cable, and tower boxes.
Description of the central pulse tower box components.
Explanation of the safety circuit and alignment types.
Description of available guidance system types.
Details on the above ground cable guidance system.
Details on the furrow guidance system.
Details on the below ground guidance system.
Overview of control panel functions and electric cord drag options.
Explanation of end of field stops and auto reverse/stop options.
Details on drive unit mounted end of field stop and auto reverse.
General operating principles and system requirements.
Explanation and settings for the overwatering timer.
Description and operation of the water shut off valve.
Procedures for starting, emergency stopping, and normal stopping.
Methods for setting up proper wheel tracks for steering.
Methods for establishing parallel wheel tracks in the field.
Description of various methods for operating the irrigation system.
Operating method suitable for most soil types.
Operating method for most soil types, allowing maintenance during stops.
Operating method for shallow applications on sandy soils.
Operating method for situations with uncontrollable water sources.
Operating method for harvesting one portion while irrigating another.
Data and examples for calculating water application rates.
Procedures for handling electric cords and operating the system.
Steps for starting the machine, including engine/generator and electric cord.
Methods for positioning hoses and electric cords for side and center inlets.
Procedures for operating the swing around feature of the machine.
Steps for securing the cart before pivoting.
Detailed steps for pivoting the swing around span.
Critical safety warnings and lockout/tagout procedures before maintenance.
Procedures for draining, filling, and checking wheel gearboxes.
Procedures for servicing helical and worm gearmotors.
Lubrication points for swing around cart and tire pressure guidelines.
Maintaining furrows and procedures for hose repair.
Ensuring cart path cleanliness and barricade integrity.
Installation of bonding ground wire and guidance cable adjustment.
Adjusting span safety box cable tension and side inlet elbow angle.
Procedures for flushing, lubricating, and cleaning the electric primer.
Procedures for aligning the machine for optimal performance.
Method for aligning towers based on relative positions.
Adjusting nuts for floating alignment based on tower movement.
Adjusting cable tension for proper floating alignment.
Adjusting connection rod for modified alignment.
Steps for flushing sand and debris from the pipeline.
Procedures for winterizing the machine and storing components.
Tables outlining regular maintenance tasks by season and component.
Regular maintenance checks for the linear machine.
Regular maintenance checks for the spans.
Regular maintenance checks for sprinklers.
Regular checks for machine alignment.
Regular maintenance checks for drive units.
Maintenance recommendations for ancillary equipment.
Charts for torque values on cap screws and critical applications.
Flowchart to diagnose and resolve in-line shut downs.
Diagnosing tower ahead shut downs due to component failure.
Diagnosing tower behind shut downs due to mechanical failure.
Table listing problems, causes, and solutions for electric primers.
To Next Page