Each controller must be configured with a unique IP address.
3.5.0.3 Connecting controllers over RS485
Connect a controller directly on the customer's LAN and network the remaining controller via RS485
network (maximum 4 controllers).
The main controller must be configured with a unique IP address.
3.5.0.4 Connecting single doors with ACTpro-100s
Door stations (ACTpro-100 or ACTpro-120) can be connected via RS485 network.
Maximum of 15 door stations on network1 and 16 door stations on network 2.
3.5.0.5 Connecting to ACTpro-100 and Aperio locks
Door stations (ACTpro-100 or ACTpro-120) can be connected via RS485 network on doors network 1 and
Aperio hubs can be connected via RS485 to doors network 2.
Maximum of 4 hubs and 16 Aperio wireless locks is supported per controller.
ACTpro-1500 Door Controller – Installation and Operating Instructions Wiring
© Vanderbilt 2020 12 A-100667
18.06.2020
To Next Page
Loading...
