3 Wiring
This section describes the following.
3.1 Typical wiring of the ACTpro-1500 controller 7
3.2 Wiring Clock&Data entry and exit readers 8
3.3 Wiring Wiegand entry and exit readers 9
3.4 Wiring OSDP readers 10
3.5 Wiring controller 11
3.6 Wiring Push Button (PB) 13
3.7 Wiring Door Contact 13
3.8 Break Glass monitoring only 14
3.9 Fire override configuration 15
3.10 Interlock/airlock configuration 15
3.11 Intruder panel wiring 16
3.1 Typical wiring of the ACTpro-1500 controller
Label Description
A Door contact, normally closed
B Push to exit, normally open
C Door networks RS485
D OSDP EOL
© Vanderbilt 2020 7 A-100667
18.06.2020
To Next Page
Loading...
