2 EN OPERATING INSTRUCTIONS
CONTENTS
2 EN Operating Instructions.....................................................................22
2.1 Introduction..................................................................................22
2.1.1 General Notice.....................................................................22
2.2 Operational Safety.........................................................................23
2.2.1 Safety Regulations...............................................................23
2.2.2 Noise and Vibrations Levels..................................................24
2.2.3 Safety Pictograms................................................................24
2.3 Basic Information..........................................................................24
2.3.1 Use of the Machine..............................................................24
2.3.1.1 Technical Data...........................................................25
2.3.1.2 Engine Information....................................................25
2.3.2 Description of the machine and its components.....................25
2.4 Operating Instructions...................................................................26
2.4.1 Machine Assembly...............................................................26
2.4.1.1 Machine Assembly Procedure......................................26
2.4.2 Commissioning....................................................................26
2.4.2.1 Engine Starting..........................................................26
2.4.2.1.1 Electric Starter Engine.......................................27
2.4.2.1.2 Mechanical choke engine..................................27
2.4.2.1.3 Automatic choke engine....................................27
2.4.2.2 Working tool start......................................................27
2.4.2.3 Machine start and travel.............................................28
2.4.2.4 Machine Stopping.......................................................28
2.4.2.5 Travel Speed Selection................................................28
2.4.3 Working with the machine....................................................29
2.4.3.1 Machine Working Width..............................................29
2.4.3.1.1 Stubble height change......................................29
2.4.3.2 Growth Cutting Method..............................................29
2.4.3.2.1 Mowing Troubles..............................................29
2.4.4 Replacement of accessories - Reconfiguration........................30
2.4.4.1 Working mechanism removal......................................30
2.4.4.2 Attaching accessories.................................................31
2.5 Maintenance, Care, Storage..........................................................31
2.5.1 Travel Wheels......................................................................31
2.5.1.1 Tyre Pressure.............................................................31
2.5.1.2 Wheel idle function....................................................31
2.5.2 Machine Lubrication.............................................................31
2.5.2.1 Engine Oil Change......................................................32
2.5.2.2 Lubrication Points.......................................................32
2.5.3 Sharpening, replacement of working tool..............................32
2.5.4 Belt drives - Automatic brake................................................32
2.5.4.1 Adjustment of the belt drive tensioner pulleys..............33
2.5.4.1.1 Travel function adjustment................................33
2.5.4.1.2 Working tool drive function adjustment:.............33
2.5.4.2 V-Belt Change............................................................33
2.5.4.3 Brake function check and adjustment..........................33
2.5.5 Servicing intervals................................................................34
2.5.6 Troubleshooting...................................................................34
2.5.7 Storage...............................................................................35
2.5.7.1 Machine washing and cleaning....................................35
2.5.8 Disposal of Packaging and the Machine at the End of its Service
Life..............................................................................................35
2.5.9 How to Order Spare Parts.....................................................36
2.6 Manufacturer’s Contact Information................................................36
2.7 Attached illustrations.....................................................................37
The manufacturer its right to implement technical changes and innovations not affecting the machine's operability and safety.
These changes may not show in these Operating Instructions. Typographical errors reserved.
2.1 INTRODUCTION
Dear Customer/User!
Thank you for your confidence in purchasing our product. You have become an owner of your machine from a wide range of machinery
and tools of the gardening, farming, small agricultural, and municipal equipment system manufactured by /lm"9::
The brush cutter is the brother of popular multi-purpose mower n. In the field of unmaintained surface
mowing, there the series multi-purpose brush cutters are irreplaceable helpers. The technical solutions used underline the machine's
overall utility value, extend its service life, and make its operation easier. The brush cutter is designed as a
$$
At
B, its mulching blade with cover may be replaced with a mowing disc for mowing long grass on hay or, for example,
with a snow plough for winter removal in the winter months. Thanks to its interchangeable adapters, this versatile machine may be fully
used during the whole year.
Please read these operating instructions carefully. If you follow the instructions contained herein, our product will serve you reliably for
many years.
2.1.1 GENERAL NOTICE
You these operating instructions and follow all the machine operating instructions in order to prevent any health risks or
property damage to the user or other persons.
The safety instructions specified in these operating instructions do not cover all the possible conditions and situations, which may occur in
practice. Safety factors, such as a reasonable approach, care, and caution are not included in these operating instructions, but it is assumed
that every person using the machine or doing any maintenance work on it is able to sufficiently use them.
Only mentally and physically fit persons may operate this machine. Should this machine be used commercially, the owner of the machine
is bound to provide operators with work safety training and instruct them regarding its operation, and keep records of such training . +B
F $ D*%F&$$DD:
If any piece of information contained in the manual is unclear to you, please, contact ,
or directly the B
%
>
:
The Operating Instructions attached to this machine form its integral part. They must be available at all times, stored at an accessible
place where they cannot get destroyed. When selling the machine to another person, the operating instructions must be handed over to the
new owner. The manufacturer bears no responsibility for the risks, hazards, accidents, or injuries resulting from operation of the machine if
the above-mentioned conditions have not been met.
The manufacturer bears no responsibility for the damage caused by unauthorized use, inappropriate operation, and any damage caused
by any modification of the machine without the manufacturer’s approval and by using$$BD:
During work it is necessary to follow safety regulations to avoid any injury to yourself or other persons present nearby and to avoid any
property damage. In the operating instructions, these instructions are marked by the following warning symbol:
49
The adapter replacement option is only available for brush cutters whose trade names end with
.
50
Fill in the dealer’s address in the table provided at the beginning of these Operating Instructions (unless it is already filled in by the dealer).
51
For the address of the manufacturer, see the end of these operating instructions.
??
Revize 10/2019
To Next Page
Loading...
Need help?
General
