Vatech A9

Vatech A9 (PHT-30CSS)
Technical manual
VDH-TeM-098
57 / 214
COPYRIGHT© 2020 VATECH.
ALL RIGHTS RESERVED
Command Function
[SPM_ARCT] CT mode
[SPM_CSON] CT sensor power on
[SPM_FISS_0001] Normal Mode : 4x4 binning & High gain
[SPM_FIPM_0001] Sensor size setting
[SPM_FISM_0001] Sensor clock (1:External, 0: Internal)
[SPM_FREQ_0100] Sensor frequency 100 Hz
[SPM_COLM_0004]
AL filter position (2 Point)
If Al Filter is not completely covered, adjust with [SPM_CEST_XXXX]
[SPM_COLM_0010]
1T Cu + AL filter location (4 Point)
If 1T Cu + Al Filter is not all covered, send [SPM_CBST_XXXX] to adjust.
[SPM_AAMS] Uoffset driven
[SPM_ABMS] FOV 8x8 driven