Vatech EzRay Air Wall - Available Option Items

3. System Overview
16 EzRay Air Wall (VEX-S300W) User Manual
Available Option Items
No. Illustration/Photo Option name Usage Material
1
Rectangular
Cover 2x3
(FOV: 2x3 / 3x2
cm)
Used for limiting the
X-ray exposure area by
covering the X-ray
Beam Limiting Device
except for the 2x3 (3x2)
rectangular area
ABS
(Acrylonitrile
butadiene
styrene)
copolymer
2
Rotating
Rectangular
Cover 4x3 (3x4)
FOV: 4x3cm,
3x4cm
(This adaptor
can be used as
both 4x3 and
3x4.)
Performs the same
function as the
Rectangular Cover.
Moreover, Rectangular
Cover rotates in 360
degrees and adjustable
in 90-degree and 10-
degree increments.
ABS
(Acrylonitrile
butadiene
styrene)
copolymer
3
Rotating
Rectangular
Cover 2x3 (3x2)
FOV: 2x3cm,
3x2cm
(This adaptor
can be used as
both 2x3 and
3x2.)
Performs the same
function as the
Rectangular Cover.
Moreover, Rectangular
Cover rotates in 360
degrees and adjustable
in 90-degree and 10-
degree increments.
ABS
(Acrylonitrile
butadiene
styrene)
copolymer
4
Exposure
Switch,
Exposure Switch
Holder
(if the Control
Panel is
installed to the
wall framework)
Used to remotely
perform exposure by
pressing the Remote
Exposure Switch
ABS
(Acrylonitrile
butadiene
styrene)
copolymer
5
Remote
Exposure Switch
(Doorbell type)
Used with the standard
‘Remote Exposure
Switch’ (only if needed)
Steel
(painted)
6
Remote
Exposure Switch
Cable
(Doorbell type)
Used to connect the
Remote Exposure
Switch to the Remote
Exposure Switch
Connector on the
bottom of the
PowerBox Assembly
PVC