Vatech IOS-U20IF - Running the Easydent; Patient Registration and Device Selection

21
4.3 Running the EasyDent
Shot functions are available after patient registration and device selection. Single shot, multi
shot, sequence shot are used frequently. You must be fully aware of the explanations before
capturing image.
4.3.1 Patient Registration and Device Selection
Step 1
Turn on the PC.
Run EasyDent4 Viewer. Click the ‘Patient ( )’ button to register a new patient.
Normal Resolution Mode
This mode is typical operating and general usage and somewhat shows
lower resolution, but gets speed of data readout faster.
https://stomshop.pro