17
Mod. Replica 2B Elettronica
Gr. 2
Vers. 1 ELETTRONICA
Vers. 2 HX
MPA 0,12 1,2 bar-17,40 psi
Serial N. 58222
240 V 4000 W 50/60 Hz
Phase trifase Amps 17
VIBIEMME SRL
via Charles Gounod, 25/27
20092 Cinisello Balsamo,
Milan, Italy
T. (+39) 02 66016691
F. (+39) 02 66016636
info@vbmespresso.com
www.vbmespresso.com
5.3,
POSITIONING THE MACHINE.
Position the machine in its final location, checking that:
• The support surface is sufficiently strong and stable (taking the machine weight into account) and that it is not sloped.
• There is the necessary space between the machine and the surrounding walls to allow technicians to carry out any maintenance/
repair operations without having to move the machine.
• The top of the machine (cup heating plate) is not more than 150cm from the floor.
• A coffee grounds knockout drawer and a space for the grinder/doser are provided.
• An electrical connection panel, a water drain and a water supply tap in the vicinity of the machine are provided.
6,
MACHINE IDENTIFICATION.
The machine equipment includes an identification plate (1) to be positioned in a
visible area.
The plate (1) bears the following data:
2 Model
3 Number of units
4 Machine version 1: electronic
Machine version 2: 2B.
5 Electrical characteristics
6 Water supply pressure
7 Serial number
8 Manufacturer’s address
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 17 19/04/16 17:28
To Next Page
Loading...
