PVR settings
Warning! ALL data will be lost.
Format disk
Format disk
4) Format:
At Format stage, press ENTER button to start formatting the USB.
Check storage equipment PVR File System is well
established. Press ENTER button to
inspect the USB files system and speed, the processing
shows Checking… ；
When USB is not inserted, or inspection failed, it shows FAIL;
When USB is inserted but didn’t be formatted, enter
Format menu;
If inspection is normal, it shows SUCCESS.
3) Check PVR File System:
Choose the disc to store whatever content need record.
As follows, default as C.
NOTE: please format your hard disk before use the
PVR function for the first time.
Select Disk
Disk C:
USB 0
2) Select Disk
Setup the PVR File system before you start recording.
Select Disk
Check PVR File System Start
Menu
USB Disk
Format
Time Shift Size
Speed
C:
Free Record Limit 3Hr.
1) Recorder System
Select Disk: Select the device for the Record files.
Check PVR File System
USB Disk: Display the USB state.
Format: Format the USB device for PVR operating.
Time Shift Size: Display the recording size of the USB device.
Speed: Display the recording speed of the USB device .
(The device has been formatted).
(The device has been formatted.
Free Record Limit: Display the free record limit of USB
device. (The device has been formatted).
When finish Creating PVR file system, it pop out Time
Shift Size setting menu, and clients can set the space
size for time shift as follows.
5) File System Size
PVR File System Type FAT32
SD 104 Mins
HD 29 Mins
Record Function (Only in DTV mode)
44
After Formatting, the PVR File system is built.
PVR File system is being built at this stage, during the USB
recognition process, the OSD media reminds user not to
plug out the USB.
Select
ENTER
Back
MENU
Select Disk
Check PVR File System SUCCESS
Menu
USB Disk
Format
Time Shift Size
Speed
C:
Free Record Limit 3Hr.
Pa ss
Pa ss
Al l
SD F AI L 0 KB /S
Start Exit
File System Size
PVR File System Size All
To Next Page
Loading...
