Settings – my data
The HR max calculated on the basis of your data is now
displayed.
HR max is the maximum heart rate value that you should not
exceed while training.
If you know your HR max, you can set the value here. If you
do not know the value, you should work with the calculated
value.
Press the BIKE button to increase the value and the
TPC button to decrease the value.
Press the SET button to confirm the value you have set.
After entering your HR max, you can now define the lower and
upper limits for the heart rate training zone.
Press the BIKE button to increase the value and the
TPC button to decrease the value.
Press the SET button to confirm the value you have set.
The response “Set OK” appears on the display.
If you want to configure further settings, press the BIKE or
TPC button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M6 returns to function mode.
To Next Page
Loading...
