Vectronix BT PLRF25C - General Operations

PLRF25C-1.2en Getting started
21
General Operations
The device is operated
entirely by one push button
only.

You can prolong the
display period by
holding down the
button while the result
is displayed.
The button operation is indi-
cated by the following
symbols:
press down the button
and keep it pressed
release the button
press and release the
button quickly (click)
number of clicks
(e.g. 3 clicks)
press and hold down
the button for the indi-
cated time
(e.g. >2 seconds)
Hold the device steady
during measurement.
The device displays the
measurement result, then
switches itself off automati-
cally after a few seconds.
3x
>2s
3x
>2s