Measurement Functions PLRF25C-1.2en
26
Complete measurement with data transfer (slope distance,
horizontal and vertical distance, azimuth, inclination)
Press and hold the button.
The azimuth appears and
is updated continuously.
Sight the object with the
aiming mark.
Hold the device steady as
you release the button.
The slope distance
D is
displayed.
If no distance could be
detected,
D---- appears.
While the display is on, click
the button to get the
horiziontal distance
H. Repeat
the step above to obtain the
vertical distance
V, the
azimuth
AZI and the inclina-
tion angle
INC.
The measurement data (distance, azimuth and inclination) is transmitted to the
interface just after a measurement is taken.
To Next Page
Loading...
