PLRF25C-1.2en Measurement Functions
27
Multiple object measurement
Up to three distances in the
line of sight can be obtained
with a single measurement.
To use this feature the
function
3DIS ON must be
activated (see page 37).
Perform a measurement as
described before. If more
than one distance has been
detected, it is indicated with
a number (1, 2 or 3) at the
very left.
While the display is on, click
the button repeatedly to
display all the obtained
measurement values.The
order of the shown ranges
is: strongest, 2nd strongest
and 3rd strongest detected
signal.
Always the distance with the strongest signal will be transmitted to the
interface.
589ç
To Next Page
Loading...
