Vectronix BT PLRF25C User Manual

PLRF25C-1.2en Troubleshooting
47
The electronic reticle
is not visible
ERET OF is set in the
configuration menu
Select ERET ON in the
configuration menu
(see page 37)
BATT LOW is
displayed
The battery is almost used up Replace battery
(see page 18)
The device measures
objects in front or
behind the intended
object
3DIS OF is set in the
configuration menu, only the
distance with the highest return
signal is displayed
Select
3DIS ON in the
configuration menu
(see page 37)
NVIS ON is displayed
after a measurement
The device is used during daylight
conditions with
NVIS ON selected
in the configuration menu
Select
NVIS OF in the
configuration menu
(see page 37)
Problem Possible cause Solution

Vectronix BT PLRF25C Specifications

General

Brand	Vectronix
Model	BT PLRF25C
Category	Measuring Instruments
Language	English