TOC-2
Dimension 3100 Manual
Rev. C
Chapter 2
Safety
2-1
2.1 Overview
. . . . . . . . . . . . . . . . . . . . . . . . .2-1
2.2 Safety Requirements
. . . . . . . . . . . . . . . .2-2
2.3 Safety Precautions
. . . . . . . . . . . . . . . . . .2-3
2.3.1 General Operator Safety
. . . . . . . . . . . . . 2-3
2.3.2 Microscope
. . . . . . . . . . . . . . . . . . . . . . . 2-7
2.3.3 Sample Safeguards
. . . . . . . . . . . . . . . . . . 2-9
2.4 Ergonomics
. . . . . . . . . . . . . . . . . . . . . . .2-11
2.5 Non-Physical Conditions
. . . . . . . . . . . .2-11
2.6 Equipment Safety Applications
. . . . . . .2-11
2.6.1 Dimension 3100 SPM Facility Requirements
2-11
2.7 Power-up Sequence (Installation and Service
Only)
. . . . . . . . . . . . . . . . . . . . . . . . . . .2-12
2.7.1 Pre Power-up Checklist
. . . . . . . . . . . . . 2-12
2.7.2 Power-up the Dimension 3100 SPM (Service and
Installation Only)
. . . . . . . . . . . . . . . . . 2-17
2.7.3 Power-up Checklist (Service and Installation
Only)
. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
2.8 Power-Up Sequence (Normal Usage)
. .2-19
2.8.1 Prepare the System for Power-up (Normal Usage)
2-19
2.8.2 Power-up Checklist (Normal Usage)
. . . 2-19
2.9 Software Power-up
. . . . . . . . . . . . . . . . .2-20
2.9.1 Select Windows NT Workstation 4.00
. . 2-20
2.9.2 Press
CTRL
-
ALT
-
DELETE
. . . . . . . . .2-21
2.9.3 Log On
. . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
2.9.4 Start the NanoScope Software
. . . . . . . . 2-22
2.9.5 Select Real-Time
. . . . . . . . . . . . . . . . . . 2-23
2.9.6 Begin Stage Initialization
. . . . . . . . . . . . 2-23
2.9.7 Software Power-up Checklist
. . . . . . . . . 2-24
2.10 Hazard Labels
. . . . . . . . . . . . . . . . . . . .2-25
2.10.1 Laser Warning Labels
. . . . . . . . . . . . . 2-25
Chapter 3
Facilities Requirements
3-1
3.1 Overview
. . . . . . . . . . . . . . . . . . . . . . . . .3-1
3.2 Optional Configurations
. . . . . . . . . . . . .3-2
3.2.1 Axiom VT-103-3K with ELCON
. . . . . . . . 3-2
To Next Page