The City of New York Fire Department Condi
tions of Approval
Certificate of Approval #4970
1. Motor wiring shall be in accordance with the New York City Electrical code for hazardous locations.
2. The installation and use of pumps shall comply with applicable New York City Code, ru
les and regulations including
3RCNY § 21-20 and/or 3RCNY § 21-21. Manufacturer’s and Underwriters Laboratories Inc.’s safety requirements
and limitations shall be complied with.
Note: To obtain a copy of the New York City Administrative Fire Code you may contact Citybooks Store at 212-669-
8246. For a copy of the Fire Department Rules of the City of New York please contact Command Information Services,
Legal Publishing Division at 518-436-8647.
3. Pumps shall b
e Underwriters Laboratories Inc. listed and pump manufacturer shall retain follow up service
requirements of Underwriters Laboratories Inc.
4. Equipment sh
all have secured and shall maintain all required approvals and shall meet all applicable Federal and State
requirements. The use of this product shall be limited to the indicated intent and has not been acceptable for other
uses or applications.
5. Certificate of Approval number shall be plainly and permanently stamped or
otherwise fixed upon each pump by the
manufacturer. NOTE: Product must already be identified
with Certificate of Approval number before it arrives at New
York City job site.
6. The Certificate of Appr
oval is issued upon condition that the material or equipment’s technology does not violate any
patent, trade name, trade secret or other intellectual right.
7. The Fire Department Certificate of Approval does not constitute
an endorsement or recommendation of your product
by the Fire Department, but is a certification that your product, as represented, meets the standards as of the date of
issuance.
8. The Fire Department reserves the right to
withdraw this approval at any time in the event there is a reasonable doubt
that the product does not operate or perform as required by code, the conditions of this resolution or as represented in
your application.
9. The Fire Department’s conditions of approval shall be enumerated in th
e installation manuals and brochures that will be
provided to New York City buyers, users and installers.
10. As the manufacturer of th
is equipment/material, you should be aware that any end user who fails to comply with the
condition as outlined in the approval will be subject to enforcement action which may include fines and imprisonment.
To Next Page
Loading...
Need help?
General
