Need help?Do you have a question about the Veeder-Root Red Jacket Maxxum Big-Flo Quick-Set Series and is the answer not in the manual?
General| Brand | Veeder-Root |
|---|---|
| Model | Red Jacket Maxxum Big-Flo Quick-Set Series |
| Category | Water Pump |
| Language | English |
Procedure for reporting and handling damaged or lost equipment during shipment.
Instructions for filing claims with Veeder-Root's designated shipping carrier.
Process for customers to file claims when using their own shipping carrier.
Procedure for returning products, requiring a Return Goods Authorization (RGA) number.
Alerts to potential hazards like explosive fuels, flammability, and electrical shock.
Provides critical safety information and guidance for installation, inspection, and maintenance.
Details potential health hazards from materials and advises on safe handling and cleanup.
Specifies conditions and regulations for the product's intended application and environment.
Advises on safe practices during operation, such as avoiding open flames and mobile devices.
Lists fuels and blends that the pumps are UL listed to operate with.
Emphasizes safety considerations for installers, including compliance with codes and leak detection.
Key points to verify before commencing the installation process.
Step-by-step guidance for physically mounting and securing the pump assembly.
Instructions for connecting the vent line to the pump manifold.
Detailed steps for making electrical connections within the pump's conduit box.
Specific wiring configurations for 208-230V single-phase pump installations.
Guidelines for wiring 208-230, 380/415, or 575V three-phase pump installations.
Procedure to verify and correct the motor's rotational direction for optimal performance.
Steps to ensure the system is properly purged and ready for operation after installation.
Guidance on installing the floating suction adapter for product intake.
Instructions for installing the Big-Flo diaphragm valve for leak detection.
Procedure for connecting siphon and vacuum lines to the pump assembly.
Steps for manifolding two pumps to increase flow rate or provide backup.
Method for pressure testing the installed piping system for leaks.
Procedure for performing pressure tests on the tank and associated lines.
Steps to remove air from the system and ensure proper product flow through dispensers.
Instructions for setting the desired line pressure after the pump stops.
Procedure for safely detaching the extracta assembly from the pump.
Steps for detaching and replacing the plug-in pump motor unit.
Guidance on reassembling the extracta assembly onto the pump.
Detailed steps for removing and reinstalling the pump's check valve.
Instructions for maintaining and replacing components of the check valve lock-down mechanism.
Diagram and part identification for the side view of the packer manifold assembly.
Diagram and part identification for the top view of the packer manifold assembly.
Diagram and part identification for the pump's yoke assembly.
Diagram and part list for the 2HP single-phase motor control box.
List of replacement pump motors with specifications like HP, voltage, and phase.
Selection guide for magnetic contactors based on pump HP and voltage.
To Next Page
