Introduction Before You Begin
2
Before You Begin
Before you begin component replacement, read the following guidelines:
• To avoid electrical shock, be sure AC power to the console is Off when performing the procedures in this
manual.
• FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY PRECAUTIONS COULD
CAUSE DAMAGE TO PROPERTY, ENVIRONMENT, RESULTING IN SERIOUS INJURY OR DEATH.
Safety Precautions
The following safety symbols may be used throughout this manual to alert you to important safety hazards and
precautions.
ELECTRICITY
High voltage exists in, and is supplied
to, the device. A potential shock hazard
exists.
TURN POWER OFF
Live power to a device creates a potential
shock hazard. Turn Off power to the device
and associated accessories when servicing
the unit.
INJURY
Careless or improper handling of tools
can cause bodily injury.
STATIC SENSITIVE COMPONENTS
Wear grounded anti-static wrist strap before
handling printed circuit boards.
READ ALL RELATED MANUALS
Knowledge of all related procedures
before you begin work is important.
Read and understand all manuals thor-
oughly. If you do not understand a pro-
cedure, ask someone who does.
WARNING
Heed the adjacent instructions to avoid
damage to equipment, property, environment
or personal injury.
WARNING
This system operates on 120/240 Vac power. Serious injury or death from
electrical shock could occur if the power ON/OFF warnings in this manual are
not heeded.
1. Read and follow all instructions in this manual, including all
safety warnings.
2. Remove rings from hands, metal watch bands and bracelets, and
loose hanging neck jewelry before performing these procedures.
3. Do not modify or use service parts other than those provided by
Veeder-Root.
To Next Page
Loading...
