63138-US-200110 53
Interlock Safety Switch
The SHLD 2 version with interlock safety switch allows switches, actuators,
valves, doors or safety fences for security.
To reach, the key to an access door or safety fence, make sure the source holder is
switched off. Only then can you open the
access point to the radiation hazardous area.
The requirements on function and design of the safety switch are extremely
different, making it impossible to mount a certain
switch version in advance.
For that reason there is only a mounting plate for the interlock safety switch. The
safety switch itself must be provided by the customer.
The safety bolt of the interlock switch must have a diameter of 16 mm.
The mounting plate has the following holes:
Figure 6.3
Drilling Template of Interlock Safety Switch
A. Mounting plate for the interlock safety switch
To Next Page
Loading...
