Vega VEGAPOINT 21 - 9 Setup with Pc;Notebook (Bluetooth); Preparations; Connecting

34
9 Setup with PC/notebook (Bluetooth)
VEGAPOINT 21 • Transistor (NPN/PNP)
56623-EN-210210
9 Setup with PC/notebook (Bluetooth)
9.1 Preparations
Make sure that your PC/notebook meets the following system require-
ments:
•
Operating system Windows 10
•
DTM Collection 10/2020 or newer
•
Bluetooth 4.0 LE or newer
Activate the Bluetooth connection via the project assistant.
Note:
Older systems do not always have an integrated Bluetooth LE. In
these cases, a Bluetooth USB adapter is required. Activate the
Bluetooth USB adapter using the Project Wizard.
After activating the integrated Bluetooth or the Bluetooth USB adapt-
er, devices with Bluetooth are found and created in the project tree.
9.2 Connecting
Select the requested device for the online parameter adjustment in
the project tree.
As soon as the Bluetooth connection to a device is established, the
LEDdisplayofthedeviceinquestionashesblue4times.
Whenestablishingtheconnectionforthersttime,theoperatingtool
andthedevicemustauthenticateeachother.Aftertherstcorrect
authentication, each subsequent connection is made without a new
authentication query.
For authentication, enter in the next menu window the 6-digit
Bluetooth access code:
Fig. 17: Enter Bluetooth access code
System requirements
Activate Bluetooth con-
nection
Connecting
Authenticate
Enter Bluetooth access
code