EasyManua.ls Logo

Ventrac 4520N - Engine

Ventrac 4520N
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting - 72
TROUBLESHOOTING
Engine
Symptom: Possible Cause:
The starter will not engage. The battery disconnect switch is in the O position.
A blown fuse in the power relay module.
A blown fuse in the start circuit.
The parking brake is not engaged.
The parking brake switch is out of adjustment.
The power unit is not in neutral.
The neutral switch is out of adjustment.
Low battery voltage.
The TCM is defective (does not output voltage)
The engine cranks, but won't start. The fuel shut-o valve is turned o.
The fuel tank is empty.
A blown fuse in the fuel or engine circuits.
A faulty fuel pump.
A plugged fuel lter.
A blockage in the fuel line.
Poor engine compression.
The engine runs rough. Plugged or partially plugged air lter(s).
Plugged or partially plugged fuel lter.
Stale, dirty fuel or wrong seasonal fuel mixture.
The fuel level is low.
Faulty spark plugs.
Moisture in the spark plug pockets.
Faulty fuel pump.
Faulty ignition coil.
Incorrect valve clearance.
Valve seat failure.
The engine is low on power. Plugged or partially plugged air lter(s).
Plugged or partially plugged fuel lter.
Dirty or faulty spark plug.
Faulty ignition coil.
Low cylinder compression.
The engine overheats. The radiator screen or radiator is dirty.
The coolant level is low.
The engine compartment has debris buildup.
The radiator cap is defective.
The thermostat is defective.
The alternator / fan belt is loose.
A blown head gasket.
A defective temperature sender.

Table of Contents

Related product manuals