Venturer PLV91237S52 - System Setup

30
Password
Use
or buttontoshiftandselectPASSWORD,
use
 button to “Change”. Enter your 4-digit
securitycodeuntilthecursortoOK.Pressthe
ENTER/OK button.
Default
Ittakes3-5secondstoresettheunittothefactorydefault.
If you forget the password, you can erase your
current password by pressing number button
8 on the remote four times, then press the
ENTER/OK button to confirm the setting
(PASSWORD : 8 8 8 8).
Parental Control
DVDsareratedaccordingtotheircontentandsomeareequippedwithapasswordfunction.The
contentsallowedbyparentallocklevelandthewayaDVDiscontrolledmayvaryfromdisctodisc.
Forexample,ifthediscallows,youcouldlockoutviolentscenesunsuitableforchildrenoryoucould
lockoutplaybackofthediscaltogether.
YoucannotplaypasswordfunctionequippedDVDsratedhigherthanthelevelyouselected
unless you cancel the parental lock function.
 Theparentallocklevelsareequivalenttothefollowingratings.
 Level1:KidSafe  Level2:G
 Level3:PG  Level4:PG-13
 Level5:PG-R  Level6:R
 Level7:NC-17  Level8:Adult
CUSTOMISING THE FUNCTION SETTINGS
SYSTEM SETUP
1.InStopmode,presstheSETUPbutton.
2.Usethe
or buttontoselecttheSystemSetupoption.
3.Pressthe
buttontohighlighttheDefault.
4.Usethe
or buttontoselectthedesiredsetupoption.
5.ToexittheSETUPMENUandreturntothenormalscreen,
highlighttheExitSetupMode(
)andpresstheENTER/
OK button.
Parental Ctrl
Password ...
Default
1 Kid Safe
2 G
3 Pg
4 Pg 13
5 Pg r
6 R
7 Nc
7 Nc
1
8 Adult
PLV91237S52_IB_VEN_W020.indd 30 1/14/2011 18:21:25