The device may malfunction when under electrostatic discharge. It can be manually resumed
by power off and power on again.
CAUTION
Connecting the Power Cord.
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and has no additional outlets or branch circuits. Do not
overload wall outlets. Overloaded wall outlets, loose or damaged well outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance, and have the cord
replaced with an exact replacement part by an authorized servicer. Protect the power cord from
physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
The mains plug is used as the disconnect device, and the disconnect device shall remain readily
operable.
To Next Page
Loading...
