Verathon GlideScope Go - Product Specifications; Monitor Specifications

32
0900-5165 REV-00
Product Specifications
Component Specifications
Monitor Specifications
Table 11. Go 2 (0570-0427)
GENERAL SPECIFICATIONS
Classication: Electrical Class II, Applied Part BF
Ingress protection: IP67
Expected product life: 1500 uses or 3 years
Internal memory 32 Gb
BATTERY SPECIFICATIONS
Battery type Lithium-ion
Battery life
Under normal operating conditions, a fully charged, new battery lasts
approximately 100 minutes, (5) intubations without recording.
Charging time
Charging time takes no more than 3 hours from an empty battery to a full
charge.
Rated capacity 1200 mAh or higher
Nominal voltage 3.7 V
Max charging voltage: 4.2 V
OPERATING & STORAGE SPECIFICATIONS
Operating Conditions Shipping & Storage Conditions
Temperature: 0–40°C (32 to 104°F) -20–40°C (-4 to 104°F)
Charging temperature: 10–40°C (50–104°F) —
Relative humidity
(non-condensing):
10–95% 10–95%
Atmospheric pressure: 700–1060 hPa
540–1060 hPa
COMPONENT SPECIFICATIONS
Display LCD, 320 x 240 px
Monitor (A) 8.9 cm (3.5 in)
Height (B) 86 mm (3.39 in)
Width (C) 98 mm (3.86 in)
Depth (D) 47 mm (1.85 in)
Weight (approximate) 0.25 kg (8.82 oz)
For operating conditions on scopes, please refer to the GlideScope Video Laryngoscopes
Operations & Maintenance Manual (part number 0900-4940) or the GlideScope BFlex
Single-Use Bronchoscopes Operations & Maintenance Manual (part number 0900-4939).