Verathon GlideScope Go - Procedure 4. Configure User Settings (Optional)

18
0900-5165 REV-00
Procedure 4. Configure User Settings (Optional)
The Settings menu allows you to congure, change, or view the following system settings and information:
Note: Some settings may be grayed out if the battery has less than 30 minutes of charge remaining. If a
setting is not accessible, charge the monitor to access.
Features—Snapshot/Video, Automatic Shutdown, Snapshot Overlays, Video Overlays, Monitor Overlays,
and Dynamic Light Control (DLC).
Media—Capacity, Export, and Remove.
Regional—Language, Date, and Time.
Administration—Device Name, Security Code, Reset Settings, and Import / Export Settings.
Device—Software Upgrade, Usage Statistics, and Service Log.
To access the Settings menu, from the Home screen, tap the More button, and then tap the Settings
button. If a security code was enabled, enter the code, and then tap the Conrm button.
Note: You may need to scroll through the settings to see all options.
A setting is switched on or o󰀨 by tapping its toggle to the right (on) or left (o󰀨). When a setting is
on, additional conguration options may be available.
FEATURES
Use the Feature Settings menu to modify the Snapshot/Video, Automatic Shutdown, Snapshot Overlays,
Video Overlays, Monitor Overlays, and Dynamic Light Control (DLC) settings.
• To congure Features settings, from the Home screen, tap the More button, tap the Settings
button, and then tap Features.
Table 6. Features Settings Menu
FEATURES MENU TREE SETTING
Snapshot/Video
Snapshot Toggle—Turns the Home Screen Snapshot button on or o󰀨.
Show Snapshot
Button
Show Snapshot button:
• For 5 seconds on tap or start
• Always
Video Toggle—Turns the Home Screen Record button on or o󰀨.
Show Video
Button
• For 5 seconds on tap or start
• Always
Auto Record
Toggle—Turns the Auto Record function on or o󰀨.
When on, recording automatically starts if the monitor is
turned on with a scope already connected, or a scope is
connected after the monitor is turned on.