Verathon GlideScope Go - Page 25

19
Operations & Maintenance Manual: Setting Up
0900-5165 REV-00
Table 6. Features Settings Menu
FEATURES MENU TREE SETTING
Automatic
Shutdown
Automatic
Shutdown
Toggle—Turns the Automatic Shutdown feature on or o󰀨.
• Shutdown Timer—Can be set for 1, 5, 10, 20, and 30
minutes.
When enabled, and only when no scopes are connected to
the monitor, the monitor shuts down automatically after the
set time.
Snapshot
Overlays
Date Toggle—Includes the date in Snapshot images.
Time Toggle—Includes the time in Snapshot images.
Device Name
Toggle—Includes the device name in Snapshot images.
For information on setting the device name, see
Administration on page 21.
Video Overlays
Date Toggle—Includes the date in video recordings.
Show Date
• For 5 seconds
• Always
Time Toggle—Includes the time in video recordings.
Show Time
• For 5 seconds
• Always
Device Name
Toggle—Includes the device name in in video recordings.
For information on setting the device name, see
Administration on page 21.
Show Device
Name
• For 5 seconds
• Always
Monitor Overlays
Date Toggle—Includes the date on the Home screen.
Show Date
• For 5 seconds
• Always
Time Toggle—Includes the time on the Home screen.
Show Time
• For 5 seconds
• Always
Device Name
Toggle—Includes the device name on the Home screen.
For information on setting the device name, see
Administration on page 21.
Show Device
Name
• For 5 seconds
• Always
Dynamic Light
Control (DLC)
Dynamic Light
Control
Toggle—Enables optimization of image quality and brightness
at the vocal cords.