SETUP
Selecting Unit Location
12 V200C AND V400C INSTALLATION GUIDE
Environmental
Factors
• The unit must be used in an attended environment.
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or motor.
• Do not use the terminal outdoors.
Electrical
Considerations
• Avoid using terminals during electrical storms.
• Place the unit 10 cm away from metallic objects to avoid interference with the
CTLS field.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Do not use the terminal near water or in moist conditions.
PIN Protection
Measures
Several techniques can be employed to provide for effective screening of the PIN
entry keypad during the PIN entry process. These methods would typically be
used in combination, though in some cases a method might be used singly.
• Position V200c and V400c terminals on the check-stand in such a way as to
make visual observation of the PIN entry process infeasible. Examples here
include:
• Visual shields designed into the check-stand. These shields may be solely
for shielding purposes, or may be part of the general check-stand design.
• Position the V200c and V400c so that it is angled in such a way that PIN
spying is difficult.
• Install V200c and V400c terminals on adjustable stands that allow consumers
to swivel the terminals sideways and/or tilt forwards/backwards to a position
that makes visual observation of the PIN entry process difficult.
• Position in-store security cameras so that the PIN entry keypad is not visible.
• Install the optional privacy shield (see Installing Privacy Shield).
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.
To Next Page
Loading...
Need help?
General
