SETUP
Periodic Inspection
14 V200C AND V400C INSTALLATION GUIDE
3 Remove all plastic wrapping from the terminal and other components.
4 Remove the clear protective film from the display.
5 Save the shipping carton and packing material for future repacking or moving
of the device.
Periodic
Inspection
Periodically inspect V200c and V400c terminals for possible tampering. Signs of
tampering include:
• Wires protruding out of the device
• Foreign objects inserted into the smart card slot or magnetic stripe slot
• Signs of damage to the tamper-evident labels
• A Tamper Warning message on the device display
If any device is found to have been tampered with, please remove it from service
immediately, keep it available for potential forensics investigation, and notify your
company security officer and your local Verifone representative or service
provider. For contacting Verifone, please see Service and Support.
For terminals equipped with a privacy shield, perform daily inspections to ensure
that the privacy shield is installed and has not been removed.
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident labels. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.