12 Using Your Jetpack
Installing/Removing the 4G LTE SIM
Card
Your SIM (Subscriber Identity Module) Card is a small rectangular
plastic card that stores your phone number and important
information about your wireless service.
You can move the SIM Card from one device to another and
your wireless service will work seamlessly as long as you have
a compatible device and service plan. To see which devices
are compatible with the Verizon Wireless SIM Card, visit
verizonwireless.com/certifieddevice.
1. Remove the back cover and battery.
2. Position the SIM card (“SIM” is inscribed near the slot opening)
with the Verizon logo facing up and the notched edge facing
towards the center of the battery compartment. Slide the SIM
card into the slot, insert the battery and attach the back cover.
Then, close the back cover.
3. To remove the SIM card, turn off your Jetpack and remove the
back cover. Remove the battery and gently slide the SIM card
out. Gently pull the SIM card out to remove it.
Note
• Contact Verizon support if your SIM is lost or damaged.
• To insert/remove the SIM card, you should remove the battery.
To Next Page
Loading...
Need help?
General
