Using Your Jetpack 13
Installing/Removing the Battery
1. Insert your fingernail into the slot at the left of the Jetpack
and gently lift the back cover to remove.
2. Slide the battery into the slot by aligning the gold-colored
contacts and press down until it clicks into place.
3. Replace the cover so the arrows on the Jetpack and cover face
in the same direction.
4. Press down around the edges of the cover until it clicks into
place and is flat across the entire bottom surface.
5. To remove the battery, turn off your Jetpack and remove the
back cover.
6. Insert your fingernail into the slot and lift the battery from the
compartment.
To Next Page
Loading...
Need help?
General
