Jetpack Settings 47
Port Filtering
Port Filtering allows you to block outgoing Internet connections
and permit only allowed applications to access the Internet. You
can also customize a list of allowed applications which permits only
certain programs to connect to the Internet.
1. Click Jetpack Settings > Advanced > Port Filtering.
2. The Port Filtering allows you to block outgoing internet
connections. When the Port Filtering is enabled, you must
select a port filtering application in the Applications to allow
that application to connect to the internet.
3. Enable each port filtering application that are needed to
access the internet.
4. Click Add Custom Application to define and enable custom
port filtering application. You need to know details of the
traffic used by the applications you wish to add.
5. Enter the Application name, Start port and End port. Then
select the protocol used by port range.
6. Click Save Changes.
To Next Page
Loading...
Need help?
General
