Settings 23
Settings
You can configure the settings on your Jetpack using the scroll up/
down and OK button. Select the desired menu by pressing or
and press . When you have finished settings, select Close
and press . And, you can go to the Home screen directly by
pressing and holding .
Wi-Fi Name/Password
1. From the Home screen, select Menu > Wi-Fi Name/Password
and press .
2. You can see the current Wi-Fi information about the Jetpack.
3. If you select Setting at bottom of screen, you can change Wi-
Fi band. See Wi-Fi Band Select on page 25.
Connected Devices
1. From the Home screen, select Menu > Connected Devices
and press .
2. Select device name and press .
3. You can disconnect the device by selecting Disconnect and
pressing .
To Next Page
Loading...
