Jetpack Settings 37
Backup and Restore
The backup and restore feature allows you to make a copy of the
configuration settings from Jetpack to a file on your computer, and
restore (upload) a previously-saved configuration file.
1. Click Jetpack Settings > Jetpack > Backup and Restore.
2. To download(backup) the settings file to your computer, enter
your administration password in the Enter Jetpack Admin
Password field in the Back up section and click Download.
Then click Save in the File Download pop-up screen to save
the settings file to a specified location on your computer.
3. To restore a setting file from your PC, enter your
administration password in the Enter Jetpack Admin
Password field in the Restore section and click and select
the file you want to restore. Then click Restore Now.
4. If you want to enables the factory reset feature, click the
checkbox next to Allow to restore Factory Defaults in Jetpack.
5. Click Save Changes.
To Next Page
Loading...
Need help?
General
