Vernacare VORTEX AIR - Water Tank Assembly

Page | 33
VORTEX AIR Technical Manual
Revision 6- Issued by N. Shields 24/08/2023
5.9. Water Tank
How it Works
The water tank holds all necessary water for the macerator to complete a cycle. There is a WRAS
compliant type A-B Air Gap preventing water in the tank getting back towards the inlet. The head
of water in the tank goes through the water inlet manifold towards the water pump which
distributes it when necessary.
1
Water Tank
2
Caps
3
Water Inlet Manifold
1
2
3