Vertex Standard FT-950 - MODE-FM Group; MODE-RTY Group

FT-950
Operating Manual
Vertex Standard Co., Ltd.
121
MODE-FM Group
056 F3E MIC
Function: Sets the microphone gain for the FM mode.
Available Values: Ur/0 ~ 100
Default Setting: 50
When this menu is set to “Ur,” you may adjust the microphone gain using the front
panel’s [MIC GAIN] knob.
057 F3E 28 RPT
Function: Sets the magnitude of the repeater shift on the 28 MHz band.
Available Values: 0 ~ 1000 kHz
Default Setting: 100 kHz
058 F3E 50 RPT
Function: Sets the magnitude of the repeater shift on the 50 MHz band.
Available Values: 0 ~ 4000 kHz
Default Setting: 1000 kHz
MODE-RTY Group
059 RTTY R PLRTY
Function: Selects normal or reverse Mark/Space polarity for RTTY receive operation.
Available Values: nor/rEV
Default Setting: nor
060 RTTY T PLRTY
Function: Selects normal or reverse Mark/Space polarity for RTTY transmit operation.
Available Values: nor/rEV
Default Setting: nor
061 RTTY OUT LVL
Function: Sets the RTTY (AFSK) data output level at the output port (pin ?) of the
RTTY/PKT jack.
Available Values: 0 ~ 100
Default Setting: 50