Vertex Standard FT-950 - Keyer Setup Options; Voice Memory Audio Levels; Keyer Configuration and Beacon Settings

FT-950
Operating Manual
Vertex Standard Co., Ltd.
112
connected.
Available Values: On/OFF
Default Setting: On
Advice: If the optional DMU-2000 Data Management Unit is not connected, this
adjustment has no effect.
DVS Group
014 DUS RX LVL
Function: Sets the audio output level from the optional Voice Memory Unit.
Available Values: 0 ~ 100
Default: 50
Advice: If the optional ??? Voice Memory Unit is not connected, this adjustment has no
effect.
015 DUS TX LVL
Function: Sets the microphone input level to the optional Voice Memory Unit
Available Values: 0 ~ 100
Default: 50
Advice: If the optional ??? Voice Memory Unit is not connected, this adjustment has no
effect.
KEYER SETUP Group
016 KEY BEACON
Function: Sets the interval time between repeats of the beacon message.
Available Values: OFF/1 ~ 255 sec
Default Setting: OFF
017 KEY NUM STL
Function: Selects the Contest Number “Cut” format for an imbedded contest number.
Available Values: 1290/AunO/Aunt/A2nO/A2nt/12nO/12nt
Default Setting: 1290
1290: Does not abbreviate the Contest Number
AunO: Abbreviates to “A” for “One,” “U” for “Two,” “N” for “Nine,” and “O” for “Zero.”
Aunt: Abbreviates to “A” for “One,” “U” for “Two,” “N” for “Nine,” and “T” for “Zero.”