Vertex Standard FT-950 - SCOPE Group

FT-950
Operating Manual
Vertex Standard Co., Ltd.
123
RX GENE Group
067 RGEN NB LVL
Function: Adjusts the noise blanking level of the IF Noise Blanker.
Available Values: 0 ~ 100
Default Setting: 50
068 RGEN CNTR LV
Function: Adjusts the parametric equalizer gain of the Contour filter.
Available Values: –40 ~ +20 dB
Default Setting: –15 dB
069 RGEN CNTR WI
Function: Adjusts the Q-factor of the Contour filter.
Available Values: 1 ~ 11
Default Setting: 10
070 RGEN DNF
Function: Enables/disables the Digital Notch Filter.
Available Values: OFF/On
Default Setting: OFF
071 RGEN DNR
Function: Set the Digital Noise Reduction response.
Available Values: OFF/1 ~ 16
Default Setting: OFF
072 RGEN NOTCH W
Function: Selects the bandwidth of the DSP NOTCH filter
Available Values: nArr (Narrow)/uuid (Wide)
Default Setting: uuid (Wide)
SCOPE Group
Advice: This group’s adjustment has no effect if the optional DMU-2000 Data