Vertex Standard FT-950 - Page 126

FT-950
Operating Manual
Vertex Standard Co., Ltd.
126
AM modes.
Available Values: 1 or 10 Hz
Default Setting: 10 Hz
085 TUN CW FINE
Function: Enabling/disabling of the “Fine” tuning speed in the CW mode.
Available Values: EnA/diS (ENABLE/DISABLE)
Default Setting: diS (DISABLE)
EnA (ENABLE): Tuning in 1 Hz steps on the CW mode.
diS (DISABLE): Tuning according to the steps determined via menu item “084 TUN
DIALSTP.”
086 TUN MHz SEL
Function: Selects the tuning steps for the [CLAR/VFO-B] knob when the [MHz] button
is pressed.
Available Values: 1 or 0.1 MHz
Default Setting: 1 MHz
087 TUN AM STEP
Function: Selects the tuning steps for the microphone’s [UP]/[DWN] keys in the AM
mode.
Available Values: 2.5/5/9/10/12.5 kHz
Default Setting: 5 kHz
088 TUN FM STEP
Function: Selects the tuning steps for the microphone’s [UP]/[DWN] keys in the FM
mode.
Available Values: 5/6.25/10/12.5/25 kHz
Default Setting: 5 kHz
089 TUN FM DIAL
Function: Setting of the Main Tuning Dial knob’s tuning speed in the FM mode.
Available Values: 10 or 100 Hz
Default Setting: 100 Hz
090 TUN MY BAND